|
“Hot Box” Demonstration of Relative Efficiencies of Insulation Systems.
This thermal image indicates the surface temperature of the sheet rock facing of six panels insulated with different materials or thicknesses. The air temperature behind the panels was controlled at 110ºF in a “hot box” which contained a fan to keep the temperature in the box uniform and to simulate the effect of wind.
The
insulation systems, their nominal
R-values, and the surface temperatures are listed in the table below.
If you don't see your solution listed,
contact an All Tech Insulation
engineer today (989-826-9999) for a deeper discussion
about your insulation requirements.
PDF Brochure of Hotbox(
169 k)
|
